|
Product Details:
Payment & Shipping Terms:
|
Measuring Current Range: | 0-2000A | Measuring Voltage Range: | No |
---|---|---|---|
Measuring Resistance Range: | No | Measuring Capacitance Range: | No |
Measuring Inductance Range: | No | Operating Temperature: | -20~+70°C |
Dimensions: | 116mm X 327mm X 35mm | Weight: | 1.2KG |
Display Type: | Analog Only |
The model Q125 current clamp on measuring instrument can be used for a current vector for the copper bar or the power aluminum bus bar on-line detection.
Electrical parameters | |
---|---|
Ratio | 1000: 1 or 2000:1 (customized) |
Accuracy class | 0.2%, 0.5% |
Primary current | 0 - 3000A AC |
Secondary current | 0 - 5A AC (customized) |
Max. Cont. Input current | 3600A |
Over voltage category | CAT III 600 V |
Output signal | 500mA,1A,5A AC at nominal input current |
Frequency range | 40Hz-2000Hz |
Dielectric strength | 3KV 50Hz/60Hz at 1 minute |
Temperature range | -20°C to +55°C |
Output | 2.5 meter cable with D01 connector |
Max. voltage not insulated conductors | 600 V |
Standard | EN 61010-1, EN 61010-2-032 |
Installation | clamp type |
Output mode | lead output(2.5m) |
Mechanical parameters | |
Dimensions (L x W x H) (mm) | 116 x 327 x 35 |
Weight (g) | 1200 |
Holding wire diameter (mm) | φ120 x 50 |
Max. jaw opening (mm) | 50 |