Product Details:
Payment & Shipping Terms:
|
TYPE: | CLAMP ON CURRENT CT PROBE | COLOR: | BLACK |
---|---|---|---|
CLASS: | 0.1, 0.2, 0.5 | RATION: | 500A/500mA |
JAW: | 40mm | WEIGHT: | 500G |
STANDARD: | EN 61010-1, EN 61010-2-032, IEC60044-1 | CABLE: | 2.5M LENGTH |
FREQUENCY: | 40HZ-2KHZ | Material: | Permalloy |
The Q40 Series AC Current Probes are high performance models, and use a custom nickel core to improve accuracy and phase shift on the low end of the measurement range. The Q40 Series is an excellent probe to be used in power and low level current measurement applications.
Electrical parameters | |||||||
---|---|---|---|---|---|---|---|
Ratio | 1000: 1 or 2000:1 (customized) | ||||||
Accuracy class | 0.1%, 0.2%, 0.5% | ||||||
Primary current | 0 - 500A AC | ||||||
Secondary current | 0 - 1A AC or 0-5V AC (customized) | ||||||
Max. Cont. Input current | 600A | ||||||
Over voltage category | CAT III 600V | ||||||
Output signal (AC current) | 250mA,500mA,1A,5A AC at nominal input current | ||||||
Output signal (AC voltage) | 250mV, 500mV, 1V, 5V AC at nominal input current | ||||||
Frequency range | 40Hz-2000Hz | ||||||
Dielectric strength | 3KV 50Hz/60Hz at 1 minute | ||||||
Temperature range | -20°C to +55°C | ||||||
Output | 2.5 meter cable with D01 connector | ||||||
Max. voltage not insulated conductors | 600 V | ||||||
Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 | ||||||
Installation | Clamp type | ||||||
Output mode | Lead output (2.5m) | ||||||
Mechanical parameters | |||||||
Dimensions (L x W x H)(mm) | 82 x 290 x 25.3 | ||||||
Weight (g) | 500 | ||||||
Holding wire diameter (mm) | φ40 | ||||||
Max. jaw opening (mm) | 40 | ||||||
Color | Black | ||||||
Material | PC+ABS+Polycarbonate, UL94 V0 |