|
Product Details:
Payment & Shipping Terms:
|
Usage: | Current | Phase: | Single |
---|---|---|---|
Coil Structure: | Toroidal | Coil Number: | Autotransformer |
High Light: | current transducer,high performance transducer,handheld clamp on transducer |
INTRODUCTION
The model XQ13 handheld clamp on current transducer is suitable for 10A-100A cable online measurement, it belongs to high performance transducer field.
FEATURES
1.Suitable for 10A-100A cable online measurement.
2.Holding wire diameter: φ13mm
3.Dimension: 52.5mm×136.5mm×28mm
4.Load capacity: ≤4Ω
5.Installation: clamp type
6.Output mode: lead output
Electrical parameters | |
---|---|
Ratio | 1000: 1 or 2000:1 (customized) |
Accuracy class | 0.1%, 0.2% |
Primary current | 0 - 100A AC |
Secondary current | 0 - 100mA AC (customized) |
Max. Cont. Input current | 120A |
Over voltage category | CAT III 600V |
Output signal | 100mA AC at nominal input current |
Frequency range | 40Hz-2000Hz |
Dielectric strength | 3KV 50Hz/60Hz at 1 minute |
Temperature range | -20°C to +55°C |
Output | 2.5 meter cable with D01 connector |
Max. voltage not insulated conductors | 600 V |
Standard | EN 61010-1, EN 61010-2-032 |
Installation | clamp type |
Output mode | lead output(2.5m) |
Mechanical parameters | |
Dimensions (L x W x H) (mm) | 48 x 179 x 27 |
Weight (g) | 280 |
Holding wire diameter (mm) | φ13 |
Max. jaw opening (mm) | 13 |