FU2200A digital Ethernet power meter with data logger is a three-phase multifunction power and energy meter
manufactured by GFUVE. It provides excellent value for monitoring power and energy management systems. It may be used
as data gathering devices for intelligent power distribution or plant automation systems. All monitored data is available via
a standard digital RS485 communication port, which is based on the Modbus RTU protocol.
FU2200A Ethernet power meter has the PC software and the data logger function, which can set by end users from
1min to 60min intervals to record.You can read the data through a PC. Also, you can share the data in the Internet LAN.
By the way, it can measure the harmonics. Back of power meter FU2200A with Ethernet port as photo shows here.
Features
1. True-RMS measuring parameters
2. ANSI and IEC 0.2 accuracy class
3. Power quality analysis
4. 4 quadrant energy
5. 2MB onboard memory, can be extended to 16M
6. Data logging
7. High-speed RS485, Ethernet port (option)
8. Measure individual harmonics from 2nd to 49th (option)
9. TOU, 4 Tariffs, 6 Seasons, 6 Schedules
10. Three years warranty
11. With PC management software; web browse data
Applications
1. Metering of distribution feeders, transformers, generators, capacitor banks and motors
3. Medium and low voltage systems
4. Commercial, industrial, utility
5. Power quality analysis
6. Data logging
7. Monitoring system
Parameters:
| Electrical parameters | |
| Power Supply (AC/DC) | AC85-400V / DC85-330V
Power consumption: <4VA |
| Measurement Parameters | Voltage (Ph-N); Voltage (Ph-Ph); Current; Frequency; PF;
Active Power(W); Reactive Power(Q); Apparent Power(S),
2nd to 49th harmonics(option) |
| Harmonics | Total harmonics ratio of phase-voltage
Total harmonics ratio of current
2nd to 49th harmonics ratio of phase-voltage
2nd to 49th harmonics ratio of current |
| Maximum Value & Minimum Value | Voltage, current, frequency, active power, reactive power, apparent power,demandP,demandQ, demandS. |
| Computation | Forward active power energy
Reverse active power energy
Forward active power energy
Reverse reactive power energy |
| Measuring Range | 0-400V, 0-6A, 45-65Hz, -1 ~ 0 ~ 1 |
| Measuring Accuracy | Voltage: 0.5%RD±0.05%FS
Current: 0.5%RD±0.05%FS
Active Power: 0.5%RD±0.05%FS
Reactive Power: 1.5%RD +0.05%FS
Apparent power: 0.5%RD +0.1%FS
Power Factor: 0.5%RD
Frequency: 0.05%RD
Active Energy: 0.5% |
| Maximum Demand | Ia, Ib, Ic, ΣPtotal, ΣQtotal, ΣStotal, 15 minutes |
| Display | Blue back-lit LCD Display
5 display figures
4 operation keys |
| Communication | Support RS-485 interface port, 32 (128) Networking
ModBus-TCP/IP communication protocol
Ethernet 10/100M port (RJ45) |
| Memory | 2M onboard memory,can be extended to 16M.
Data looger interval can set by end users from 1min to 60min.The default is 15min.
You can read the data through a PC, also you can select the data to diaplay and store from software. |
| Programmable | Measuring system: 3P4W/3P3W etc
Transformation Ratio: PT 1-10000; CT 1-10000 |
| Energy Pulse | Provides active & reactive energy pulse output
Pulse parameters can be choosed
Range: 0.1-10000kWh/kvarh
Dry contact output (1Ax100V) |
| Connection Mode | 3P4W, 3P4W BAL, 3P3W, 3P3W BAL, 1P3W, 1P2W |
| Communication | RS485 Port, Baud: 1200-57600, Standard 38400;
Ethernet Port (option) |
| Mechanical parameters | |
| Dimensions (L x W x H) (mm) | 96 x 96 x 12.8 |
| Mounting | Panel mounting
Trepanning: 92x92mm
The thickness of installation: 51mm |
| Environmental conditions | |
| Temperature | -5 to +50 °C |
| Humidity | 20%-95%RH, Without condensation |
| Warranty | Three years warranty |
