Basic parameters |
CPU |
ARM11 1G Hz |
Memory |
KE44A-26BN/4GB, EDE2116AEBG-8E-F/1G |
Operating system |
Android 4.0 |
Communication |
USB2.0, 38K Infrared (Can transfer as far as 12m.) |
Display screen |
3.5-inch touch screen, 640x480 dots |
Keyboard |
25 Silicone keyboard |
Battery |
Rechargeable battery 3000mA/3.7V |
Expansion slots |
MICRO SD card |
SIM card slot |
2 slots |
Audio |
High-volume speakers |
Camera |
300 pixels, LE D flashlight |
GPS |
Accuracy of 3 m, UBLOX NEO-6M GPS-six |
Drop Specifications |
6 surfaces can withstand drops from 1.5 meters to concrete impact |
Scroll to specifications |
1,000 times 0.5 meters, six rolling contact surface |
Sealed environment |
IP64 |
Wireless communications (option) |
GSM/GPRS/EDGE: GSM850/EGSM900/DCS1800/PCS1900
WCDMA/HSDPA:2100M(band I), 1900M(band II), 850M(band V) CDMA2000 |
Wireless Module (Option) |
IRDA, RF, HF, UHF |
E-Tag RF13.56mhz (option) |
Supported Standards |
EPC Gen 1 (0kind, 1kind) and Gen 2 |
Low working frequency |
125kHz |
Tabdomining |
EM 125KHz |
Working frequency of high frequency: |
13.56MHz |
protocol standard |
ISO14443A/B, IS015693, |
Nominal read range |
5.0cm to 10cm |
Rated write scope |
5.0cm to 10cm |
Range |
From the front of the device from the 70° angle (according to the band) |
Barcode reader (option) |
Optical Resolution |
0.005 inches minimum bar width |
Rotation angle |
Vertical deviation angle +/-30° |
Tilt angle |
The angle from normal +/-65° |
Offset visual tolerance |
Deviation from the normal angle of +/-60° |
Ambient light: Sunlight |
8,000 ft. candles (86,112 Lux) |
Artificial light |
450ft.candles(4,844Lux) |
Scanning frequency |
50 scans per second (+/-6) times (two-way) |
Scan angle |
46.5° (standard) |
Laser power |
1.0 ma (standard) |
Reading accuracy |
Laser greater than 6 mil |
Laser safety |
IEC2/ FDA II grade, standards compliance IEC60825-1/ EN60825-1 |
Camera |
Supported for 2D barcode Read |
Mechanical parameters |
Dimension (L×W×H) (mm) |
200×70×27 |
Weight |
Includes standard battery 320 g |
Environmental conditions |
Working temperature |
-20°C to 50°C |
Storage temperature |
-25°C to 70°C |
Humidity |
5%RH-95%RH(no condensation) |